Monday, April 15th, 2019 by notreble.com

Specs:
Scale:   34″
Construction:   Bolt-on
Body:   Two piece Swamp Ash
Neck:   Allparts Maple 51 P
Finish:   Vintage blonde
Pickup:   Jess Loureiro 51 P split coil
Nut:   Tusq nut
Bridge:   Wide travel Thunderbird bridge plus tailstop, Nickel
Pickguard:   Matte black single ply
Tuners:   Gotoh GB528 lightweight tuners, Nickel
Pots:   Allparts push/pull Volume pot, CTS Tone pot
Knbos:   Silver reflector cap knobs
Other:   Telecaster jack cup. Nickel
Strings:   GHS Brite Flats 49-108

Monday, April 22nd, 2019 by notreble.com

Atelier Kraken Mammoth Bass

Specs:
Scale:   34″
Body:   Ash
Neck:   Maple With Rosewood Reinforcements
Fretboard:   Rosewood
Radius:   Compound 10″-18″ Radius
Inlays:   Aluminum
Frets:   Inox
Pickups:   Nordstrand Audio Big Split (bridge) and NP4 (neck) pickups
Bridge:   Hipshot Kickass
Tuners:   Hipshot Ultralite
Finish:   Stain and Satin Finish

by Best Bass Gear

Lawton SignaTuur Fretless 5-String

Spec list:

Basswood 2-piece body

Rippled Sycamore neck

ROCKLITE® Ebano fingerboard

Kent Armstrong Claymore Soapbar pickup

Mini-toggle switch for series/split/parallel)

500k push/pull knob for tone/on-off (no volume!) with .047 ceramic tone cap

Gotoh machine heads

Gotoh Hardtail bridge (string-thru option)

Green abalone side markers

Nitrocellulose finish

Scale length: (35”) 890mm

Nut width: 45mm

Number of frets: Fretless

Fretboard radius: (14″) 355mm

String spacing at bridge: 76mm

Overall length: 1135mm

Body width: 335mm

Body depth: 40mm









https://www.youtube.com/watch?v=9j2hAps_MQg

Monday, April 29th, 2019

Urbaniak Not Pear 003

Specs:
Scale Length:   34″
Top:   Scotch Pine (Blue Pine)
Back and Sides:   Ash (recovered from 1922 piano side boards) / Tapered 3 1/2″ Tail 2 5/8″ Head
Grafting:   Zebrawood (reused from leftover instrument builds)
Bridge:   Zebrawood
Saddle and Nut:   Ebony and Padouk
Fingerboard:   Laminated Pau Ferro (Morado), Zebrawood, and Figured Maple
Neck:   Figured Maple – trussed core/stacked heal block









https://youtube.com/watch?v=0ubsKXg5Jqk

by Best Bass Gear

 Stewmade 60’s Hybrid GT










https://youtube.com/watch?v=gyjnb4H2lEU

Monday, May 6th, 2019 by notreble.com

Cosmic Woodworking Jupiter Bass

Specs:
Scale:   35″
Construction:   Set Neck
Body:   Swamp Ash, Spanish Cedar
Top:   Carved Sitka Spruce
Neck:   5-piece Mahogany, Wenge, Pau Amarillo W/ Sitka Spruce Headstock Veneer
Fingerboard:   Rosewood
Nut:   Bone
Nut Spacing:   1.550″
String Spacing:   .750″
Pickup:   Curtis Novak Darkstar pickup 17.4mm spacing
Pickup Ring:   Rosewood
Electronics:   Passive - Volume/Tone
Controls:   Rosewood
Bridge:   Hipshot B Style Brass
Tuners:   Hipshot Ultralite
Finish:   Linseed Oil and Beeswax
Weight:   7.6 lbs
Origin:   Hand-built in Maine

το τελευταίο μαρέσει, φοριέται πολύ αυτη η τεχνική και στις κιθάρες τα τελευταία χρόνια.

Monday, May 13th, 2019 by notreble.com

Lassila Guitars Antipode

Specs:
Scale Length:   Multi-scale; B - 37″, E - 36.25″, A - 35.5″, D - 34.75″, G - 34″
Neck width at Nut:   46mm
Nut Material:   Brass
Bridge Spacing:   18mm
Bridge Pieces:   Hipshot Solo - (black)
Fretboard:   Bocote, 14″ radius, with Stewmac medium higher nickel silver fretwire and Luminlay side markers
Neck:   5 piece neck through, Black Limba, Padauk, Birdseye maple. Carbon fiber reinforcement bars and dual action truss rod.
Body wings:   American Black Walnut
Top/Headstock veneer:   Rippled Ash with a periwinkle purple stain.
Finish:   Tru-oil coats with wax paste to finish.
Tuners:   Hipshot Ultra Lite - (black)
Pickups:   Nordstrand Zen Blade set
Electronics:   Passive - Military Grade 500K pots (V-V-T) (Right handed) - CTS 500K LH pots (V-V-T) (Left-handed), Switchcraft Barrel Jack, 0.047uF Bumblebee workalike capacitor.
Straplocks:   Dunlop flush mount - (black)
Strings:   Payson nickel round wound multiscale.

by Best Bass Gear

Lawton SignaTuur Fretless 5-String

Spec list:

Basswood 2-piece body

Rippled Sycamore neck

ROCKLITE® Ebano fingerboard

Kent Armstrong Claymore Soapbar pickup

Mini-toggle switch for series/split/parallel)

500k push/pull knob for tone/on-off (no volume!) with .047 ceramic tone cap

Gotoh machine heads

Gotoh Hardtail bridge (string-thru option)

Green abalone side markers

Nitrocellulose finish

Scale length: (35”) 890mm

Nut width: 45mm

Number of frets: Fretless

Fretboard radius: (14″) 355mm

String spacing at bridge: 76mm

Overall length: 1135mm

Body width: 335mm

Body depth: 40mm










https://youtube.com/watch?v=9j2hAps_MQg

Monday, May 20th, 2019 by notreble.com

Tüi Instruments Muhu Bass

Specs:
Strings:   3
Body Back and Sides:   Bog Oak, Cocobolo
Top:   Juniper
Neck:   Ash
Fretboard:   Cocobolo
Pickup:   Single Coil
Tailpiece:   Cocobolo

Monday, May 27th, 2019 by notreble.com

Kinal Guitars Kompact 4

Features:
Scale:   30″
Body:   Alder and Flame Maple
Top:   Spruce
Neck:   Maple
Fretboard:   Ebony
Pickup:   Graph Tech Piezos
Electronics:   Graph Tech 3-band Preamp
Bridge:   Hipshot
Finish:   Oil/Wax

by Best Bass Gear

RADICIC 1711 Little Thunder








https://www.youtube.com/watch?v=hMkjswjWVxc

Monday, June 3rd, 2019 by notreble.com

PHD Guitars Kai Eckhardt Signature Bass

Specs:
Scale:   34″
Construction:   Set Neck
Body:   Quilted Mahogany
Top:   Redwood Burl, Ebony, Walnut and Quilted Maple
Neck:   Birdseye Maple
Fingerboard:   Macassar Ebony
Frets:   Fretless
Line Inlays:   Maple
Side Dots:   Glow in the Dark
Faceplate:   Macassar Ebony
Pickups:   Nordstrand
Electronics:   Bartolini PHD Preamp, Graph Tech Piezo System
Tuners:   Hipshot Ultralight
Bridge:   Hipshot
Hardware Color:   Gold
Weight:   8 lbs

by bestbassgear.com

DIY Bass Kit

Here are the specs on this custom guitar.

Body: Basswood

Neck: Maple

Fingerboard: Rosewood

Electronics: EMG

The bass was built by Anthony DiMauro and painted by Michael Bourne.

Monday, June 10th, 2019 by notreble.com

Owl Bass Guitars Alchemist 4/32

Features:
Scale:   32 Inches
Body:   3pc Walnut
Top:   Claro Walnut
Neck:   Roasted Maple, Padauk
Neck attachment:   Semi neck through, 1.5 degree angle to body
Fretboard:   EA Rosewood, 16″ Radius
Frets:   Stainless
Hardware:   Hipshot USA-Bridge-A-series 20mm-Tuners GB10
Pickups:   Bassculture W-Buckers
Pre amp:   East UK ACGEQ-01
Strap buttons:   Waverly





https://www.youtube.com/watch?v=A9qfVuVJj-I

by Best Bass Gear

Kirbatron No.1

Anyway, the neck is a 5 piece maple and walnut neck thru design, with 2 carbon fiber rods and 1 truss rod. it has a wenge,maple,walnut top on the headstock and a walnut truss rod cover held with a magne. It has a single cut body design. The 3 piece body wings are made with a mahogany back a walnut center and a wenge top with a mystery veneer in between that I salvaged from a veneer manufacturer in the area.The bass side of the body is chambered in 2 seperate section. The larger section ports at the pick up cavities. The fret board is gabon ebony with maple binding. nickel frets since I like nickel strings as well. 35 inch scale length with hand made brass nut, a schaller 3d-5 bridge and some tuners from allparts. I actually put in some EMG 45TW 6 string pick ups because this was originally going to be a 6 string. Walnut frames around pickups to cover my poor routing abilities. Made my own knobs with of course maple, walnut ,wenge. Still haven’t made the control cavities yet but I’ve been playing this for a couple months now and surprisingly it plays and sounds better that any of the basses that I own.








https://www.youtube.com/watch?v=SMiVjjLY9UA

Monday, June 17th, 2019 by notreble.com

Moonshine Custom Guitars EVH Tribute Bass

Specs:
Body:   GFS Paulowina
Neck:   Maple
Fingerboard:   Maple
Nut:   Custom Brass Locking Nut
Pickups:   Import Style Double J with Neck Pickup and Middle Switch Dummied
Bridge:   Import Bass Tremolo
Other:   Eye Bolts (Screws) for Strap Buttons, Red and Yellow Reflectors Installed on the Rear of the Body

Θα ηθελα να ηξερα την τιμη απο αυτο το moonshine. Βλεπω, στην καλυτερη mim Fender κλειδιά, και θα κοστίζει κανα 3χιλιαρο το μπασο....

Οπως βλεπετε αγαπητοί μου φίλοι, όπως ο Κύριος πρώτα έπλασε τον Αδάμ και μετά την Εύα, έτσι πρώτα έπλασε την Κιθάρα και μετά το μπάσο....
Και όταν λέω Κύριος, δεν εννοώ Τον EVH αλλά Τον Άλλον Τον Κανονικό!

ελα ελα τωρα ασε τα χαζα..σε λιγο θα μας πεις και οτι η γη ειναι επιπεδη..

ελα ελα τωρα ασε τα χαζα..σε λιγο θα μας πεις και οτι η γη ειναι επιπεδη..

εγω αγαπάω το μπασο, είναι εξάλου και αυτό μια μορφή κιθάρας  

αλλα οκ, αγγίζω ευαίσθητες ΧΟΡΔΕΣ, το κόβω τώρα αμέσως το αστείο.

Monday, June 24th, 2019by notreble.com

StoryWood Music Model 4R-5 4-String J Bass

Specs:
Scale:   34″
Body:   120-year-old heart pine reclaimed from the Duke Ellington School of the Arts, thin clear water-based finish
Neck:   100-year-old maple flooring reclaimed from Creighton University's old gymnasium
Nut:   1.5″ Graphtech nut
Fingerboard:   Water-recovered rock walnut that spent 100 years under water in the lakes around the Panama Canal, reclaimed maple dots
Pickups:   Aguilar 70s Era Jazz Set
Bridge:   Babicz FCH Full Contact Bass Bridge
Tuners:   HipShot Products Ultralite Clover Peg Tuners
Case:   Gator TSA Hardshell Case

Monday, July 1st, 2019 by notreble.com

CP Thornton B-034 Bass

Specs:
Scale Length:   34″
Body:   Swamp Ash
Top/Back:   5A Eastern Maple
Neck:   Torrefied Maple
Fingerboard:   Torrefied Maple
Fingerboard Inlay:   Ovals
Nut Width:   1 19/32″
Fingerboard Radius:   12″
Fretwire:   EVO .047 X .104
Tuners:   Hipshot Ultralight
Bridge:   Hipshot A Style
Pickups:   Nordstrand Soap Bar Big Split
Controls:   Active/Passive circuitry

Monday, July 8th, 2019 by notreble.com

Sivcak Guitars NDHS 5 062916

Specs:
Scale:   34″
Construction:   Bolt-On Construction /5X Steel Screw
Body:   Swamp Ash US
Top:   Curly & Quilt maple
Neck:   Hard Maple CA
Nut:   Graphtech Black TUSQ Nut 46,5 mm
Fingerboard:   Birdseye Maple CA + Abanone Inlay
Machine Head:   Gotoh 720 Lite
Bridge:   Hipshot B / 19 mm Saddle
Pickups:   Nordstrand FatStack 5
Fret wire:   2.5 mm Special Steel
Frets:   22
Electronic:   Aguilar OBP-3
Finish:   Neck Satin Nitro Lacquer / Body High Gloss Lack (Red Burst)
Weight:   7.89 lbs

by bestbasgear.com

ACS Custom Bass Headless Drop D II

It was all made with Brazilian woods: the body is marupá, the neck 5 pcs Imbuia/Amapá, gombeira fingerboard, with ACS Drop D system,  scale length 32/36 on 4th string when dropped. Hipshot headless bridge, EMG 35HZ pickups, Bartolini NTMB918 preamp, active.








https://www.youtube.com/watch?v=Jxh7FuyeIFY