100 watt single end!

[Jezus]

Απλα δειτε το μεγεθος αυτης την λαμπας 



Ισως να ειναι μεγαλυτερη και απο αυτη που ειχαν οι DAR (δεν εχουν πλεων σελιδα, οποτε δεν μπορω να τσεκαρω). Τερας! 400 watt αν δεν ηταν σε SET τοπολογια...

[Jezus]

Χεχ, το βρηκα, αριστερα του DAR, δεξια του Γερμανου... 33,5 κιλα το εργαλειο, να το αφησω? 

[Korgy]

εννοειται πως κανουμε οικονομια και ειμαστε οικολογοι.
οποτε, οταν παιζουμε με αυτο το τερατακι, βαζουμε απο πανω του ΚΑΙ αυτο

[hot_sauce (φλουτσ)]

εννοειται πως κανουμε οικονομια και ειμαστε οικολογοι.
οποτε, οταν παιζουμε με αυτο το τερατακι, βαζουμε απο πανω του ΚΑΙ αυτο

άνθρωπέέέ μου!

[adr1anos]

WOW!!!!.. 

[Jezus]

Βλεπω ολο το λαδι στη λαμαρινα παραπανω και με πιανει αναγουλα 
Παντως με 5 ecc83, 2 ecc81 & 2 kt88 να οδηγουν την 833, δεν ειναι απιθανο να ψησεις και αυτο!
Εχει και 6 καναλια, καθαρο, κραντς και λιντ, ολα διπλα! 
One more photo...



Overview Single-ended triode technology with 100 watts output power
 1. no crossover distortion
 2. no feedback of the output stage
 3. minimum phase shifts
 4. very low noise, almost no noise
 5. not selected amplifier and driver tubes needed consistently balanced sound even at low volumes,
 crystal-clear, high-resolution reproduction of the guitar signal in the clean channel.

Q: Why single-ended output stage with a 400-watt triode?
 
 A: Is "single ended" is currently the only circuit design, in which the input signal (in this case, the electric guitar) not divided into a positive and a negative half cycle and then put back together, but more as a complete unit. This leaves the guitar signal from the instrument to get to the speaker as a whole. Crossover distortion that occur during the normal-mode operation are necessarily excluded in the single-ended operation completely, making this amplifier from small to high volume levels and still the same accurate, detailed sound. A negative feedback, which will reduce the crossover distortion, among other things, is not present, which is a much airier and more transparent reproduction of sound.
 The audible result of using this single-ended amplifier without negative feedback is a crystal-clear and nuanced representation of the original signal, ie at low and high volume levels, and with a remarkable dynamism. Sound changes due to temperature fluctuations or poorly paired power tubes can occur in this circuitry not only a single ended triode.
 
 The special feature of a triode as compared to a pentode is that it produces mainly even harmonics, which is amplified by the single-ended operation yet. It is primarily the second Harmonic formed, which corresponds to an octave above the fundamental. (Even harmonics sound the human ear is very pleasant, rather odd, and thus enharmonic scratchy). The resulting sound when using a real triode is a harmonious, rich contours and high-resolution sound.
 
 With the "400-watt triode" 833, it has succeeded to realize the above benefits with an output power of 100 watts, making this amplifier is suitable for club gigs and studios as well as great live concerts. The somewhat "muddy" sound that adheres to the conventional tube amplifiers part, which no longer reach the specified performance, this amplifier does not, as constant due to the extremely long lifetime of the power tube's performance over a long period of time. (The 833 was developed for a radio transmitter tube for continuous operation at 400 watts anode performance. In ERUPTION it is loaded with only 300 watts!). It is still used in small radio stations and, therefore, made in Russia and China and is available from leading distributors. Your price is approximately equivalent to a selected Quartet EL34 / 6L6 - power tube set.